Stikiller.com: Mitsubishi Lancer Evolution 8 & 9 Performance Parts :: Engine :: Camshafts, Gears, and Belts :: GSC Power-Division Evolution 4-8 Camshafts S-Series

  GSC Power-Division Evolution 4-8 Camshafts S-Series #16734
GSC Power-Division Evolution 4-8 Camshafts S-Series  GSC Power-Division is proud to release the much anticipated S-Series Camshafts for the EVO 4-8 4G63T Motor. With 2 different profiles S1 and S2 cams that provide unmatched gains for anyone with a stock turbo all the way to a large GT37 series turbo. GSC also offers a Custom S3 grind for those pushing the 1000whp mark!

The S1 cams are designed for those with the stock turbo or 300-400whp range. These cams will not sacrifice any bottom end loss over stock cams; nothing but gains and will promote faster spooling of the upgraded turbos. Gains of 30-55whp (depending on Turbo) have been seen by simply bolting the S1 cams in. Designed for a rev range of 3000-8000rpms, these cams work well on the stock valve springs. 300-450whp camshaft. Idle is slightly ruffer than stock.

S1 Specs .
 
6008S1 ADV Duration Duration @ 1mm Peak Lift CenterLine
Intake 268 216 11.00mm 107
Exhaust 268 220 10.50mm 113


The S2 cams are designed for those with more power in mind or a larger turbo. No low end power is lost vs the stock cams when used with the larger turbos. The S2 cams will show gains of 50-70whp over the stock cams and in some cases more in the higher RPMS. Great for 2.0L engines revving to 9000rpms or for Stroker motors revving to 8000rpms. The S2 Cams are suggest to run on our upgraded Beehive valve spring replacement or can be run at the stock revlimit and factory boost on the stock spring. Designed for a rev range of 4000-9000 RPMS(2.0L or 3000-8000 2.2L+), 400-700whp applications. S2 cams can run on Factory ECU with custom flashing.

S2 Specs .
 
6008S2 ADV Duration Duration @ 1mm Peak Lift CenterLine
Intake 274 230 11.20mm 107
Exhaust 274 230 11.00mm 113



The S3 Cams are a Hydraulic Lifter Cam for the Evo 4-8 4G63. These cams are designed for the 700whp+ to take advantage of a very large turbo with a lot of flow capability. t!
S3 Specs .
 
6008S3 ADV Duration Duration @ 1mm Peak Lift CenterLine
Intake 280 238 11.70mm 109
Exhaust 280 238 11.70mm 115

Details
 
Weight30.00 lbs
Price: $499.00

Options
 
Profile
Quantity


If you see this message it means that your browser doesn't support Javascript or it is disabled. Please enable JavaScript in your browser settings for the proper functionality of X-Cart.


  23%
 

  Send to friend
Your name: *
Your e-mail: *
Recipient's e-mail: *

 Send to friend 
 

  Detailed images




 

  Related products
#16401 GSC Power-Division 4G63T Single Beehive Spring set
#16733 Gates Racing Timing Belt for the Evo 4-9
#16328 Fidanza Cam Gear For Mitsubishi 4G63
#16812 GSC Power-Division 4G63T Titanium Beehive Spring upgrade with 4340 Chro-Molly Seat
#16832 GSC Power-Division ZERO-TICK Lifters for the Mitsubishi 4G63
 

  Recommended products list
  • AEM 5 Bolt Cam Gears For Mitsubishi Lancer Evolution VIII
  • AEM Short Ram Air Intake System - Lancer Evolution
  • Agency Power Front Motor Mount Kit for the Evolution VIII and IX
  • Agency Power Shifter Bushings Mitsubishi EVO VIII, IX 5 Speed
    •  
     

    		 

    Powered by GSCMotorsports.com Scion TC Performance Parts - Evo 8 And 9 Performance Parts - Subaru WRX and STI Performance Parts - Toyota Supra Performance Parts
    Copyright
    Copyright © 2005-2010 Stikiller.com: Mitsubishi Lancer Evolution 8 & 9 Performance Parts